Menu

MRM Soft Edge Standard

  1. Compatibility

    Edging material must be compatible with the flashing and cladding material.

  2. Durability

    Edging material must have the same durability as the cladding material

  3. Formability

    Edging must be able to be dressed to within 3 mm of the pan of all profiles, and 5 mm to the cornder of trapezoidal profiles

  4. Rigidity

    Soft edging must remain in position in wind loads up of to 65 m/s.

  5. Backing

    Metallic soft edge may be backed by an inert layer of other material to improve striffness and shape retention. Perforated metallic soft edging without a back is also acceptable.

/cop/testing-and-mrm-standards/mrm-soft-edge-standard
Revision Category: 
4 - Clause Inserted
Revision Detail: 

New clause.