Fixing
Smooth shank nails must not be used for fixing clips as they do not comply with the loads given in Load/Clip Spacing.
Hand or gun-driven screws both provide better performance and are the preferred fixing. The depth of penetration is a major performance factor when considering the wind design load.
Ideally, clips should be positioned to coincide with sarking support positions.
Clause:
015_004_004_001_000_000_000_000_000
Clause Number:
15.4.4.1
/cop/other-products/standing-seam-cladding#fixing
Revision Category:
0 - Clause Removed
Draft Clause:
014_004_004_001_000_000_000_000_000
- Log in to post comments