Roll Cap
Roll cap systems are made from materials of a temper suitable for springing or snapping together. There are many variations, but all depend on the interlocking of a cap and the panel. Some panels have interlocking edges and do not need a separate capping.
When using traditional short lengths, adjacent sheets of metal are joined lengthwise using cross welts and drips for the transverse joints. These types of joints allow for expansion.
Ridges and eaves panel fixing details must accommodate the lengthwise expansion movement of the sheeting.
Batten rolls running from ridge to eaves can be used on all roofs were the minimum pitch is 5°.
Clause:
015_004_002_007_000_000_000_000_000
Clause Number:
15.4.2.7
/cop/other-products/standing-seam-cladding#roll-cap
Revision Category:
0 - Clause Removed
Draft Clause:
014_004_002_007_000_000_000_000_000
- Log in to post comments