Joining Safety Mesh
When joining rolls or sections of safety mesh the two transverse wires must be placed together and the longitudinaltail wires must be twisted around each other. One longitudinal tail wire must be twisted four times around the main portion of the same wire. The other longitudinal tail wire must be twisted once around the main portion of the same wire and then four times around the two transverse wires.
Clause:
013_001_012_000_000_000_000_000_000
Clause Number:
13.1.12
/cop/site-practice/safety#joining-safety-mesh
Revision Category:
0 - Clause Removed
Draft Clause:
012_001_012_000_000_000_000_000_000
- Log in to post comments