Menu

Roller Application

Apply to the spreading rate and film build specified for brush application. Dampen the roller prior to use, then load up the roller and apply two full even coats, allowing sufficient drying time between coats.
Apply with even pressure, and do not over-roll. Profiled rollers are available for corrugated profiles, but some profiles may require the combined use of brush and roller of the paint for complete application.

 

Clause: 
016_008_007_000_000_000_000_000_000
Clause Number: 
16.8.7
/cop/maintenance/overpainting#roller-application
Revision Category: 
0 - Clause Removed
Revision Detail: 

This clause has been removed during the overall revison of Maintenance. Brush Application is not discussed in Paint.

Draft Clause: 
015_008_007_000_000_000_000_000_000