Soffit Flashings

Where a soffit and the horizontal or vertical metal wall cladding meet, the junction should be over flashed with an angled flashing which provides the same cover as is required for other flashings. (See Flashing Cover.) 

This flashing is an under/over flashing, i.e., it should be installed above the soffit lining and over the outside of the metal cladding.

Where a curved soffit meets a vertical wall, the flashing can be 'gear crimped', crimped as shown or lockseamed. (See Crimped Flashings and Jennied Flashings,) 








Clause Number: 
Revision Category: 
0 - Clause Removed
Revision Detail: 

Clause removed.

Draft Clause: