Test Report

The following information must be supplied in the report:

1. The number of the report and the name of the client.
2. The date and location of the test.
3. The name of the testing officer.
4. The test Procedure — referencing this section of the Code of Practice.
5. Details of the material under test — Type/Profile/ Material/ thickness/ Spans.
6. Critical dimensions, particularly crest height and spacing, are measured, recorded and compared to published profile data.
7. Coil number of material used to run trial material.
8. Fastener type and fixing pattern.
9. UDL at deflection limit.
10. Last noted load prior to UDL serviceability failure, and mode of failure.
11. Last noted load prior to Strength failure, or maximum load reached
12. Pass/fail for serviceability point load to pan
13. Pass/fail for serviceability point load to rib
14. Pass/fail for strength point load to pan
15. Pass/fail for strength point load to rib