Menu

Sealing Washer Conductivity

The maximum current flow through a sealing washer shall be equal to or below 0.5 × 10-6  A for all thermoset and thermoplastic materials, and shall be tested by the specified procedure in Appendix L. of AS/NZS 3566. Any current flow above this level shall be deemed as not meeting the requirements of this Standard.

 

Clause: 
017_002_003_005_000_000_000_000_000
Clause Number: 
17.2.3.5
/cop/testing-and-mrm-standards/mrm-fastener-performance-requirements-and-testing#sealing-washer-conductivity
Revision Category: 
4 - Clause Inserted
Revision Detail: 

New clause.