Menu

Strippable Films

Strippable film is a clear pressure sensitive polyethylene plastic film that is applied to some roofing products to assist in protecting the surface from damage and scratching during forming, transportation, handling, storage, and erection.

Strippable film is designed to provide some protection to the product before and during installation on the building. It is not designed to protect against corrosion, humidity, or chemicals.

Strippable film must be removed before prolonged exposure to sunlight, as that may make it extremely difficult to remove.  Prolonged exposure and wet conditions can also cause the film adhesive to whiten and breakdown, leaving residue on the painted surface when the film is removed.  Once removed from the sheet for installation, strippable film must be collected and removed from the site.

 

/cop/installation/strippable-films
Revision Category: 
3 - Substantial change to recommendation
Revision Detail: 

This clause has been reviewed as part of a substantial revision of COP Clause 14. Installation.

Draft Clause: 
013_001_006_000_000_000_000_000_000